Logic Pro Stem Splitter Bleed: How to Clean the Vocal Stem

By IntrectNovember 15, 2026Last reviewed StemsBleedLogic ProGuide

You ran Stem Splitter on a song in Logic Pro, soloed the Vocals track, and the drums are still there: a ghost of the snare, a hi-hat ticking along, chords washing under the long notes. That leftover is bleed. This guide explains where it comes from, what you can do with Logic’s own tools, and how to remove the part those tools cannot reach.

We make de-leak, a bleed-removal plug-in that runs in Logic as an Audio Unit. We say where it fits and where Logic’s built-in plug-ins are enough.

The short answer

Split from the best-quality file you have, then deal with the bleed in two layers. Use Logic’s Noise Gate or region edits for bleed in the gaps between phrases, and EQ only for a single obvious band. For bleed that plays while the singer sings, use a bleed remover that works per frequency band, and listen to what it removes before you commit.

What Stem Splitter does, and why bleed is normal

Apple introduced Stem Splitter with Logic Pro for Mac 11 in May 2024. It splits a mixed audio recording into Drums, Bass, Vocals and Other on the Mac itself. Logic Pro 11.2 (May 28, 2025) added Guitar and Piano parts, a submix option and presets such as a cappella and instrumental. According to Apple’s user guide, you Control-click an audio region and choose Stem Splitter from the Processing menu. Logic places the results in a summing stack below the track and mutes the original region.

Every separator, Stem Splitter included, works from the finished mix. It has to estimate how much of each moment and each frequency belongs to the voice. Where a snare hit, a cymbal or a chord occupies the same frequencies as the singer at the same time, part of it lands in the vocal estimate. Researchers who score separation call this interference, and in a studio it is called bleed. It is not a setting you missed in your project.

First, check that it is bleed

Loop a phrase that has a held note, a consonant and a gap. Solo the Vocals track and listen.

What you hearWhat it usually isWhere to start
Snare, hi-hat or chords in the gaps and under the notesBleed from separationThis guide
A glassy or watery layer that stops when the voice stopsSeparation residue (artifacts)Removing shimmer from vocals
A wash that keeps decaying after each phraseReverb from the original mixDecide whether you want to keep it; bleed removal also takes some of it
Harsh bursts on s and t sounds onlySibilanceA de-esser

Our guide to removing instrument bleed from a vocal stem has a 60-second version of this diagnosis and covers Demucs and htdemucs stems in detail.

What to try inside Logic first

  1. Split from the best source. If you have a WAV or AIFF of the song, split that rather than an MP3. Lossy compression adds its own high-frequency hash, and the separator cannot tell it apart from the voice.
  2. Clean the gaps. Between phrases, bleed is the only thing on the track. Logic’s Noise Gate, or simply cutting and fading the region where nobody sings, removes it there. Set the gate’s threshold just above the bleed level, with enough release that breaths and word endings survive.
  3. Use EQ for one obvious band only. If the bleed is mostly a low kick thump, a high-pass on the vocal well below the singer’s lowest note helps. If it is mostly hi-hat, a gentle high-shelf cut can help, but it dulls the voice’s air too. Past one or two moves, EQ starts removing the singer.

That leaves the bleed that plays while the singer sings. A gate opens for the voice and lets the snare through with it, because a gate decides on level, not on content. This is the part that needs a different tool.

Removing the bleed under the voice in Logic

A bleed remover decides, band by band and frame by frame, whether what it hears belongs to the stem. de-leak does this with two engines: the Gate, a learned 16-band leak gate, and Leak Clean, a 64-band model that keeps the direct voice and lets the rest go. They can also run in series as Gate → Clean.

  1. Insert it on the Vocals track of the Stem Splitter summing stack, as an Audio Unit (look for Intrect in Logic’s Audio Units list). It loads the Medium preset with the Gate engine. On a vocal, compare it with the gentler Default preset.
  2. Turn on Residual. Residual plays the dry signal minus the processed signal, so you hear only what is being removed. Turn your monitoring up by 20–40 dB, because the removed signal is quiet. You want to hear drums, instruments and room. If you hear words, melody or the body of the voice, it is too strong.
  3. Try Leak Clean on the same passage if bleed survives the Gate, then Gate → Clean. Keep the one that sounds right. Leak Clean can also listen to the original mix on a sidechain: pick a track that carries the full mix from the Side Chain menu in the plug-in header, and make sure that track is actually sending audio.
  4. A/B against Bypass. Bypass plays the input delayed by the same amount, so the comparison stays in time.
  5. Bounce, and keep the original. Leave the untreated Vocals region in the project so you can redo the chain later.

de-leak reports a fixed latency of about 257 ms at 44.1 kHz (Standard setting). Logic compensates for it automatically, and offline bounces sound the same as playback, but it is not meant for monitoring while you record. The de-leak manual lists the latency at other sample rates and in the Low latency setting.

de-leak has a 14-day trial in your DAW; formats and system requirements are on the product page.

What bleed removal cannot do

Found bleed in a stem?

de-leak has a 14-day trial for macOS and Windows hosts that load VST3 or CLAP. Comparing tools first? Read the bleed comparison.

Related guides

Sources

FAQ

Why does Logic Pro's Stem Splitter leave drums in the vocal?

Stem Splitter estimates each part from a finished stereo mix, and where the voice and the drums or chords share the same frequencies at the same moment, some of the other parts end up in the vocal estimate. That leftover is bleed. It is a limit of separating a mix after the fact, not a fault in your project.

Can I fix Stem Splitter bleed with Logic's own plug-ins?

Partly. A Noise Gate cleans the gaps between phrases, and EQ can thin a hi-hat or low thump, but neither can remove bleed that plays while the singer sings without also cutting the voice. For that you need a tool that decides per frequency band, frame by frame, whether the sound belongs to the vocal.

Does de-leak run in Logic Pro?

Yes. The macOS installer includes an Audio Unit for Apple Silicon and Intel Macs, so de-leak appears in Logic Pro's Audio Units list. It reports a fixed latency of about a quarter of a second, which Logic compensates automatically, so it is for mixing and bouncing rather than live monitoring.

Is bleed in a Stem Splitter vocal the same as mic bleed?

No. Mic bleed is a real second source picked up by a microphone on a recording session. Stem Splitter bleed is a separation error: parts of the mix that the separator could not take out of the vocal estimate. They need different tools.